What are the tips for using stainless steel thread rolling board screws? Now the stainless steel material model has a lot to do with its life. Commonly used 302, 304, 316, 201, 667, when ordering stainless steel rolling plate, you need to tell the stainless steel rolling plate manufacturer which stainless steel material model you are using, so that The stainless steel dental plate manufacturer chooses the appropriate material and heat treatment process for it!

Zhongyi introduces you the machining process of the thread rolling board. The production route of the thread rolling board is: blanking-forging-spheroidizing annealing-machining-cold rolling thread-quenching + low temperature tempering-grinding processing (1) Forging: This process is to repeatedly upset and lengthen the bar, the purpose is to make the carbide distribution uniform, and at the same time change the internal streamline distribution of the steel.

Only need to install the thread rolling board in the movable mold groove and the fixed mold groove, and there is no need for any thin pads or iron sheets under the mold. Only need to properly adjust the gap between the two thread rolling plates, and then tighten and fix. Adjust the gap between the two plates so that the blank can just be compressed. If the gap is too large, the blank will not be rolled and fall off. If the gap is too small, the blank will not enter the gap between the two plates, and similarly, the blank will not be rubbed and fall off. At the same time, the gap between the upper and lower ends of the two thread rolling plates is adjusted by rotating the two fastening bolts and the tightening bolts.

Zhongyi tells you the definition and characteristics of the thread rolling board. The thread rolling board is used for the two square templates on the thread rolling machine. It is divided into two pieces, one long and one short, with tooth patterns on it. It is used to align the screws with light nails. Tools for extrusion forming into threads. It is one of the screw molds. The thread rolling board is a special tool for processing taps and bolts. Thread rolling board is the most commonly used thread tool for processing screws and bolts in the standard fastener industry

The stainless steel tooth plate is a kind of special used for screwing stainless steel screws in the screw factory. It is different from the general steel tooth plate in the material of the tooth plate and the heat treatment process. There are generally three types of thread processing: turning, thread rolling and thread rolling, while turning screws are mainly used for thread processing of medium and large workpieces, and thread rolling and thread rolling are used for thread processing of a large number of small bolts.

The installation and adjustment of the thread rolling board only needs to install the rolling board in the movable mold groove and the fixed mold groove, and there is no need for any thin pads or iron sheets under the mold. Only need to properly adjust the gap between the two dental plates, and then tighten and fix. Adjust the gap between the two plates so that the blank can just be compressed. If the gap is too large, the blank will not be rolled and fall off. At the same time, adjust the gap between the upper and lower ends of the two thread rolling plates by turning the two tightening bolts and the tightening bolts.