Dongguan Zhongyi Screw Mould Co., Ltd. !




Dongguan Zhongyi Screw Mould Co., Ltd.

Zhongyi Mould Stainless steel tooth plate, thread rolling plate

4News -> Industry news

1. Because its strength and hardness are equivalent to carbon steel (grade 6.8) under normal conditions, stainless steel products should not be impacted or beaten, and care should be taken to maintain the surface finish and precision, and no force can be applied like carbon steel products. , Do not apply too much force. At the same time, due to the good ductility of stainless steel, steel chips will stick to the thread level of the nut during use, increase the friction force, and easily lead to lockup. However, even if iron chips are produced using carbon steel, Falling, not easy to lock up compared to stainless steel

2. The stainless steel material model has a lot to do with its service life. Commonly used are 302, 304, 316, 201, 667. When ordering stainless steel dental plates, select the appropriate material and heat treatment process according to the stainless steel material model. .

The advantages of stainless steel dental plates:

304M, 304HC, and 316 are currently one of the most widely used materials of 300 series austenitic stainless steel. The obvious difference between the materials is: after cold working, the material is magnetic 316<304HC<304M. Compared with 304M and 304HC, 316 material is resistant to chemical corrosion, pitting corrosion and seawater corrosion resistance, and is more beautiful and hygienic.

1. The service life of the stainless steel tooth plate has a great relationship with the performance of the machine, oil product, the degree of machine age, the size of the gap, etc. The performance of the machine is stable, and the wear on the stainless steel tooth plate will be much less, and the life will be shortened. To improve the oil, you must choose a special rubbing stainless steel screw oil.

2. Master adjustment machine: The service life of the stainless steel tooth plate is also closely related to the method of the master adjustment machine. Some masters press the stainless steel tooth plate very tightly, and the front end of the stainless steel tooth plate is easy to fix. It will wear off. If the dental plate emits a lot of smoke during the production process, it will seriously affect the service life of the dental plate. Therefore, it is best to lay the dental plate flat and slowly press it to the proper position.

Stainless steel tooth plate is a special kind of screw factory for screwing stainless steel screws. The tooth plate material and heat treatment process are different from the general steel tooth plate. There are generally three types of thread processing: turning, thread rolling and thread rolling, while turning screws are mainly used for thread processing of medium and large workpieces, and thread rolling and thread rolling are used for thread processing of a large number of small bolts. With the continuous advancement of science and technology, the demand for bolts with special uses such as high strength, no rust, wear resistance, and acid and alkali corrosion resistance is increasing. Therefore, it is necessary to develop corresponding tooth plates to process screws of different materials and different needs. .

Prev:Knowledge of stainless steel fasteners
Next:What is the biggest difference between thread rolling board and other conventional products?
Dongguan Zhongyi Screw Mould Co., Ltd. Copyright 2021 Technical Support:【Dongguan Website Construction